Scholarly Publication

Permanent URI for this collection

https://kwasuspace.kwasu.edu.ng/handle/123456789/93

Browse

Browsing Scholarly Publication by Author "A.S., Olawore"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    2D Flow around a Rectangular Cylinder: A Computational Study
    (AFRREV STECH: An International Journal of Science and Technology, 2013-01-01) A.S., Olawore; I.F., Odesola
    The unsteady flow around a rectangular cylinder is an area of great research for scientist for several years. A two-dimensional unsteady flow past a rectangular cylinder has been investigated numerically for the low Reynolds numbers (flow is laminar). Gambit has been used throughout this work to generate the geometry and meshes and the computational fluid dynamics analysis is done using fluent software. The influence of vortical structure and pressure distribution around the section of rectangular cylinders are examined and reported. The integral aerodynamic parameters are also reported. Strouhal numbers for Reynolds numbers of 55, 75, 100, 150, 250 and 400 are 0.102, 0.122, 0.129, 0.136, 0.139 and 0.158 respectively. The magnitudes of the coefficient of drag for the Reynolds numbers are 1.565, 1.524, 1.432, 1.423, 1.526 and 1.545. The lift coefficient for flow around a rectangular cylinder with a chord-to-depth ratio equal to 5 of low Reynolds numbers of 55, 75, 100, 150, 250 and 400 are 0.067, 0.101, 0.157, 0.212, 0.404 and 0.537 respectively. The pressure drags obtained in the simulations at zero angle of incidence are 1.446, 1.455, 1.439, 1.412, 1.579 and 1.602 for Reynolds numbers 55, 75, 100, 150, 225, and 250. The velocity across the rectangular cylinders varies from 0.089 to 1.02m/s. The forces caused by vortex shedding phenomenon must be taken into account when designing buildings for safe, effective and economical engineering designs.
  • Thumbnail Image
    Item
    Performance Evaluation of a Single Cylinder Spark Ignition Engine Fuelled by Mixing Ethanol and Gasoline
    (J. Appl. Sci. Environ. Manage., 2021-05-07) A.S., Olawore; W.I., OSENI; K.O., OLADOSU; E.O., FADELE
    The use of ethanol blend as an alternative source of fuel for developing clean and sustainable energy sources has grown considerably. In this study, the performance characteristics of an air-cooled, single-cylinder 4-stroke Spark Ignition (SI) engine (TD201) with a compression ratio of 8.5:1 was determined using gasoline and different blend ratios of ethanol and gasoline (E0, E2, E4, E6, E8, E10, and E12) at a varied engine speed of 2000rpm, 2200rpm, 2400rpm, 2600rpm and 2800rpm. The results revealed that as the ethanol content of the blend increases, the heating value decreases while octane value increases. The experimental results indicated that the brake torque, and power increase as the ethanol content in the blends increases. However, BSFC and exhaust temperature decreases as the ethanol content in the blends increases because of the oxygen enrichment. The emissions of unburned hydrocarbon and carbon monoxide reduce while carbon dioxide and ethanol content increases when compared with the reference fuel (E0).