Browsing by Author "A. T. Abdulrahim"

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    APPLICATION OF STEARIC ACID FOR SOLAR THERMAL ENERGY STORAGE IN A DOUBLE COMPARTMENT SOLAR BOX COOKER
    (2019-06) M. B. Maina; S. Shodiya; A. T. Abdulrahim
    Energy storage in some form is the need of the hour to even out the mismatch between energy supply and demand. Thermal Energy Storage (TES) system employing a phase change material (PCM) has been widely considered as an effective way to store and retrieve energy due to its high heat storage capacity at almost constant temperature during the phase change. In this work, an energy storage system was designed to study the heat transfer characteristics of stearic acid (as a phase change material in a double compartment solar box cooker (DCSBC) fabricated using wooden materials with high thermal energy storage system. In order to analyze the various characteristics of the PCM, the Bureau of Indian Standards (BIS) was used throughout the experiment. Investigations were performed to determine the first and second figure of merits (F1 and F2) of compartments 1 and 2 (C1 and C2) simultaneously. The results for F1 were found to be (C1= 0.14 and C2= 0.15) and F2 were (C1=0.47 and C2= 0.4) while the overall thermal efficiency of the cooker after water boiling test for C1 with 2.5kg and C2 with 3kg of water were deduced to be 77% for C1 and 92% for C2 after six hours of the load test, showing considerable temperature increase and extension of heat retention making possible to cook the dinner and even breakfast the next day.
  • Thumbnail Image
    Item
    Characterization and Generation of Municipal Solid Waste in North Central Nigeria
    (International Journal of Modern Engineering Research (IJMER), 2012-10) M. B. Oumarou; M. Dauda; A. T. Abdulrahim; A. B. Abubakar
    The study focused on the characterization and generation of municipal solid waste in the north central part of Nigeria. Daily samples were collected and interpreted using Microsoft Excel for quantification purposes while the characterization samples were collected during the months of February, March and April and during the raining season in August. The refuse physical characteristics were then evaluated by sifting through the waste and separate it into its various physical major components. They were analyzed for proximate and ultimate composition using ASTM standards. Average moisture contents were found to vary from 26.743 to 32.593. Wood, paper, plastic and leaves were found in varying proportions and an average waste generation of 1. 23 kg per person per day was found. Energy recovery is possible with an addition of supplementary fuel as sugar cane straw, weeds. The knowledge of the refuse CV alone is not enough to conclude whether the refuse will burn or not. Its moisture content is also an essential parameter.
  • Thumbnail Image
    Item
    Design, Fabrication and Performance Evaluation of Solar Brick Oven
    (2016-01-01) M. B. Maina; G. M. Ngala; A. T. Abdulrahim
    -Bread baking in Maiduguri and environs (north eastern Nigeria) is mainly done in ovens that are fuelled by charcoal sourced from fuel-wood; this process releases harmful greenhouse gasses to the atmosphere with known negative effects on the environment. The demand for fuelwood as energy source by bakeries and household users is increasing while the resource is becoming scarce and costly when available. These require immediate attention by providing alternative sources that are environmentally safe, less costly and accessible locally, so that overdependence on fuel-wood is greatly reduced. A potentially cost effective alternative energy source that is locally available is the solar energy. Three materials (glass, Perspex and aluminum) were used as window/screen materials for the oven, onto which a parabolic solar collector was focused. All the three materials achieved baking bread at different temperatures and time, Glass oven baked at 90oC screen temperature and 120OC oven temperature in 3hours, Perspex oven baked at 150oC screen temperature and 130OC oven temperature in 3 ½ hours and aluminum oven baked at 130oC screen temperature and 150OC oven temperature in 2hours thirty minutes with solar insolation of 850 w/m2 on the test day. Glass and Perspex sustained defect at different temperatures and exposure time. It was observed that aluminum screened solar oven produced bread with oven performance efficiency of 16% while glass screened oven produced bread at 63% efficiency and Perspex screened oven produced bread at 51% efficiency. Temperature profiles within and outside the oven were analyzed (with and without load). Analysis of the experimental results showed that solar radiation, ambient temperature and wind velocity with respect to the screening materials were the most influential factors.