Scholarly Publication

Permanent URI for this collection

https://kwasuspace.kwasu.edu.ng/handle/123456789/95

Browse

Browsing Scholarly Publication by Author "Koloskov Volodymyr"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Improved Criterion in Method of Assessment of the Safety Level of the Process of Land Recultivation of Places of Ammunition Disposal and Destruction
    (Scientific and Technical Journal, 2022-11-25) Andronov Volodymyr; Didovets Yurij; Koloskova Hanna; Jinadu Abdulbaqi; Koloskov Volodymyr
    The relevance of the research and the need to develop methods that allow assessing the level of safety of the disposal and destruction of ammunition sites are shown not only at the present time, but also in the future when land reclamation measures are applied. An improved criterion for assessing the safety level of the reclamation process of the lands of the disposal and destruction of ammunition sites was developed based on the use of a regulatory approach, and significant indicators were determined, namely: the probability of an explosion, the amount of excessive pressure in the air shock wave, and the level of degradation of the lands of the disposal and destruction of ammunition sites. An improved method of assessing the safety level of the process of land reclamation of the disposal and destruction of munitions by using an improved criterion for assessing the safety level of the process has been developed. The proposed method is suitable not only for long-term evaluation, but also for operational safety management of similar objects. The main advantage of the proposed method in comparison with those used today is to take into account the entire complex of active factors of explosion risk and environmental danger, while minimizing the number of significant environmental quality indicators. Thanks to this, it becomes possible to reduce the amount of calculations required for accurate assessment by a set of regulatory criteria, and also simplifies the assessment procedure without loss of accuracy.
  • Thumbnail Image
    Item
    Investigation of the Influence of Geometrical Parameters on The Take-off Mass of Unmanned Aircraft Wing
    (АКТУАЛЬНІ ПИТАННЯ СУЧАСНОЇ НАУКИ. ІІ МІЖНАРОДНА НАУКОВО-ПРАКТИЧНА КОНФЕРЕНЦІЯ, 2014-10-24) Jinadu Abdulbaqi; Tiniakov Dmytro; Koloskov Volodymyr
    The aim for carrying out investigation on the wing parameters of an unmanned aircraft take-off mass is to look for its geometrical and structural weakness so as to be able calculate and deduce new parameters that will increase the general performance of the aircraft, thus reducing its take-off mass. These parameters include the relative airfoil thickness, aspect ratio, taper ratio and sweep angle. Along the line in the research, limits are used to define load factor and landing speed. These limits are used, as when displayed on the graph, give the ability to determine the minimal mass within the limit range.
  • Thumbnail Image
    Item
    Model of Safety Management System of Land Recultivation of Places of Ammunition Disposal and Destruction
    (Scientific and Technical Journal,, 2021-11-25) Didovets Yurij; Koloskov Volodymyr; Koloskova Hanna; Jinadu Abdulbaqi
    An analysis of the impact of explosion hazards on the level of environmental safety of disposal and destruction of ammunition. An analysis of existing technologies of land reclamation that can be used for places of disposal and destruction of ammunition, and identified opportunities and limitations of their use. For the first time, a simulation model of the safety management system for land reclamation and ammunition destruction was created. During the development of the model, it is proposed to consider the parameters of the site of disposal and destruction of ammunition, which determine the parameters of explosion risk, and environmental quality indicators, as responses to the influence of factors of operation of the site of disposal and destruction of ammunition. Safety criteria are determined using a regulatory approach in three areas: current factors, explosion risk parameters and environmental quality indicators. The integrated safety criterion is defined as the highest value of all individual safety criteria.
  • Thumbnail Image
    Item
    Optimization of Aircraft Fuel Dump Rate towards the Mitigation of Post-Impact Fire
    (Defect and Diffusion Forum1662, 2023-06-06) Jinadu Abdulbaqi; Olayemi Adebayo Olalekan; Daniel Joshua; Odenibi John Oluwatomiwa; Tiniakov Dmytro; Koloskov Volodymyr
    This study seeks to improve the utilization of compressed air towards a faster fuel jettisoning, to increase the survival rate of passengers in the event of an accident or aborted takeoffs by augmenting the already existing means of dumping fuel with no considerable increase in overall weight. The aircraft fuel dump sub-system was isolated, this process was achieved with the aid of the venturi effect. A jet which provides a direct connection between the fuel tank and the mixing chamber sucks fuel from the tank, where bypassed air from the compressor expels the sucked air in fine particles. After running the simulation, the mass flow rate was computed. The compressed air inlet has a mass flow rate of 58.5193(Kg/S), the kerosene inlet 1.2385(Kg/S) while the outlet has a relative value of-59.6541(Kg/S).This study seeks to improve the utilization of compressed air towards a faster fuel jettisoning, to increase the survival rate of passengers in the event of an accident or aborted takeoffs by augmenting the already existing means of dumping fuel with no considerable increase in overall weight. The aircraft fuel dump sub-system was isolated, this process was achieved with the aid of the venturi effect. The engine compressor marks the start of the aircraft fuel dump sub-system while an exterior nozzle for displacing the fuel marks its end. This system achieved jettisoning through bled-off air from the compressor, passing through a converging-diverging nozzle (primary supersonic nozzle), thereby creating a vacuum in the mixing chamber. A jet that provides a direct connection between the fuel tank and the mixing chamber sucks fuel from the tank, where bypassed air from the compressor expels the sucked air in fine particles. After running the simulation, the mass flow rate was computed. The compressed air inlet has a mass flow rate of 58.5193(Kg/s), and the kerosene inlet 1.2385(kg/s) while the outlet has a relative value of -59.6541(kg/s).